5-2 Installing and Using Utilities
NEC EXPRESSBUILDER
The NEC EXPRESSBUILDER, integrated setup software, can automatically detect the hardware
connected to an NEC Express5800/320Fc series machine to advance the processing. The hardware
subject to setup with the NEC EXPRESSBUILDER should have the same configuration as that for
operation.
Start Menu
The NEC EXPRESSBUILDER provides two procedures to start the server as described below. The
menus and items appearing on the screen vary depending on the procedures.
Booting the server from NEC EXPRESSBUILDER CD-ROM
Insert the NEC EXPRESSBUILDER CD-ROM
into the drive of the primary PCI module and start
the NEC Express5800/320Fc.When the NEC
Express5800/320Fc series is started the NEC
EXPRESSBUILDER top menu shown on the
right appears.
Setup the NEC Express5800/320Fc series from
this menu.
IMPORTANT:
Do not use this CD-ROM on servers other than
the NEC Express5800/320Fc series with which it is packaged (including other NEC
Express5800 models).
See "NEC EXPRESSBUILDER Top Menu" for details.
Inserting NEC EXPRESSBUILDER CD-ROM on a
Windows system
The "Master Control Menu" starts automatically (see
figure on the right) after you place the "NEC
EXPRESSBUILDER" in the DVD-ROM drive.