Peripheral Configuration - NEC Express5800/120Ri-2 User Manual

Nec servers user's guide
Hide thumbs Also See for Express5800/120Ri-2:
Table of Contents

Advertisement

Peripheral Configuration

IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port A
Base I/O address
Interrupt
Serial Port B
Base I/O address
Interrupt
USB 2.0 Controller
Parallel ATA
Note that the interrupt and/or base I/O address are not
Parameter
Description
Disabled
Selects whether serial port A is
[Enabled]
enabled or disabled.
[3F8]
Selects the base I/O address for serial
2F8
port A.
3E8
2E8
IRQ 3
Selects the interrupt for a serial port A.
[IRQ 4]
Disabled
Selects whether serial port B is
[Enabled]
enabled or disabled (display only).
3F8
Selects the base I/O address for serial
[2F8]
port A.
3E8
2E8
[IRQ 3]
Selects the interrupt for a serial port A.
IRQ 4
Disabled
Selects the USB 2.0 controller is
[Enabled]
enabled or disabled.
Disabled
Selects parallel ATA is enabled or
[Enabled]
disabled.
Configuring Your Server 4-11
Your Setting
[
]: Factory-set

Advertisement

Table of Contents
loading

Table of Contents