Setting The Multi Shot - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH
Photo Mode :
Setting the Capturing Options

Setting the Multi Shot

You can take a series of pictures continuously with
just one press of the shutter.
1. Turn the Mode Dial to Photo
2. Press the [POWER] button to turn on the
Miniket Photo.
3. Press the [MENU] button.
N Menu screen appears.
4. Move the joystick left / right to select
<Multi Shot>.
5. Select an option by moving the joystick up /
down, and then press the joystick (OK).
Disables Multi Shot and takes one photo at a time.
Off
Enables Multi Shot and takes 3 photos in a row.
Normal
Enables Multi Shot and takes 3 photos in a row
AEB
with exposure bracketing of -0.3 EV / 0 EV / +0.3
EV
6. Press the [MENU] button to exit the menu.
N An icon indicating the selected Multi Shot mode
appears on the screen.
N If <Off> is selected, no icon will be displayed.
[ Notes ]
✤ When you set the Multi Shot enabled, you cannot
use the flash.
✤ < Anti-Shake> is not available when you set the
Multi Shot enabled.
✤ Restarting the Miniket Photo will cancel the
Multi Shot setting.
✤ Regarding Multi Shot with Scene modes, refer to
page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop]
button will exit the menu.
3
2592
mode.
Photo
Multi Shot
Photo
4
Multi Shot
Photo Photo
Photo
Multi Shot Multi Shot
Move
Off
Multi Shot
Normal
AEB
Move
Photo
Move Move
5
Multi Shot
Move
Photo Photo
Multi Shot Multi Shot
Photo
Off
Normal Multi Shot
Photo
AEB
Move
Multi Shot
Move Move
6
Move
2592
Move
23
23
23
23 23 IN
N
ISO
Select Exit
Select Exit
OK Select Select MENU Exit Exit
Select Exit
ISO
Select Exit
N
N
Select Select Exit Exit
OK MENU
23 23 IN
Select Exit
✤
23
✤
Select Exit
✤
23
✤
✤
23
65 65