Setting The System; Setting The Ntsc/Pal - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH
Setting the Miniket Photo :

Setting the System

Setting the NTSC/PAL

You can set the Miniket Photo's output properly when playback on a
TV .
1. Turn the Mode Dial to the Settings
2. Press the [POWER] button to turn on the
Miniket Photo.
3. Select <NTSC/PAL> by moving the joystick
left / right.
4. Select the desired option by moving the
joystick up / down and then press the
joystick (OK).
N <NTSC>: Sets to NTSC standard.
N <PAL>: Sets to PAL standard.
Refer to page 146
5. After you finish setting, turn the Mode Dial to
the desired mode.
[ Warning ]
✤ Recording and playback settings should be identical. NTSC
recordings are properly played back in NTSC mode.
✤ If recording and playback settings are different, displayed video
may not be perfect.
✤ When using a TV, be sure to set the same output setting. Playback
on a TV is not available if the video format is different than that of
Miniket Photo. For example, Miniket Photo is set to PAL and the
TV video format is NTSC, then video playback on the TV is not
available.
Settings
mode.
3
Settings Settings
NTSC/PAL
NTSC/PAL NTSC/PAL
Move Select
Move Move Select Select
4
Settings Settings
Settings
NTSC/PAL NTSC/PAL
NTSC/PAL
Move Move Select Select
Move Select
N
N
.
✤
NTSC NTSC
✤
✤
.
.
146
45 45