Programming A Recording (Without 'Showview') - Philips VR200/02 User Manual

f
Confirm with the button when the information is
OK
correct.
D The programming information has been stored in a
TIMER block.
g
Make sure that the cassette you have put in can be
recorded on.
h
Switch off with the TV/STANDBY m
The programmed recording will only function when the
video recorder is switched off with the
button.
D If any of the TIMER blocks are in use, '
up on the video recorder display.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY m button.
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'TIMER RECORD' will flash on the TV
screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the
TIMER
the available TIMER blocks. If you want to clear or
check a TIMER block, select it with the
button.
P r
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or
EXT.1 AV 1 EXT.2 AV 2
button.
TV/STANDBY m
k ' will lights
' will flash on the
k
button, you have used up all
or
P q
).
Programming a recording
(without 'SHOWVIEW')
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the button on the remote control twice .
TIMER
c
Select a free TIMER block with the
Press the button.
TIMER
DATE PROG START V/P END
01 01
------------------------
gTIMER CLEAR
NEXT
-/+ 0-9
d
With the , C/Sq
TIMER
can select 'DATE' (date), 'PROG' (programme number),
'START' (start time) and 'END' (end time).
Enter or change your information with the
P r button, or with the number buttons
D Under 'DATE', use the
or weekly programming.
'D': Recording from Monday to Friday.
'W': Recordings every week on the same day.
D Under 'START', use the
'VPS or PDC' on or off.
e
Confirm with the button when the information is
OK
correct.
D The programming information has been stored in a
TIMER block.
f
Make sure that the cassette you have put in can be
recorded on.
g
Switch off with the
TV/STANDBY m
The programmed recording will only function when the
video recorder is switched off with the
button.
D If any of the TIMER blocks are in use, '
up on the video recorder display.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY m button.
or button.
P q P r
20:00 21:30
gCL
D/WgSELECT OK
or D/Sr button you
or
P q
.
0-9
button to select daily
SELECT
button to switch
SELECT
button.
TV/STANDBY m
' will lights
k
17