Special Installation Functions; Automatic Tv Channel Search; Monitor Function; Sorting And Clearing Tv Channels Manually - Philips VR200/02 User Manual

Special installation functions

You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.

Automatic TV channel search

The video recorder will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button on the remote control. The main
MENU
menu will appear.
c
Select the line 'AUTOSEARCH' with the
button.
d
Press the button. The 'Automatic TV channel search'
OK
starts.
SEARCH
e
When the TV channel search is complete, 'READY' will
appear on the screen.
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.

Monitor function

You can switch backwards and forwards between TV picture
and video recorder picture with the
only works when you use a scart cable to connect the video
recorder to your TV set and if your TV set responds to this
switch-over.
8
or
P r P q
00
button. But this
MONITOR

Sorting and clearing TV channels manually

You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button on the remote control. The main
MENU
menu will appear.
c
Select the line 'CHANNEL ALLOCATION' with
P q button and confirm with the
P01
------------------------
-/+
d
With the or
P r P q
which you want to give a programme number (starting
with 'P01').
e
Confirm with the
OK
D If you want to delete a TV channel, press the
CLEAR (CL), y button.
f d e
Repeat steps to
number to all TV channels.
g
To end, press the
TV/STANDBY m
button.
OK
CH26
CL OK
button, select the TV channel to
button.
until you have given a programme
button.
P r or