Setting The Time And Date - Philips VR570/58 User Manual

a
b The programme number of the TV channel has not yet been assigned to
the ShowView number. Using the number buttons
control, select the corresponding programme number (name) of the TV
channel and confirm with
a
b The entered ShowView number is incorrect. Correct your instructions or
MENU
end with
b Check the time/date (see chapter 'Installing your video', section 'Setting the
time and date').
a
b A daily recording was entered for the wrong day. Daily programming can
only be used for recordings to be made from Monday to Friday.
5
The decoded data appears after confirmation. You can go back to
change the data. Select the corresponding input field using
SqP or QSr . Change the data with P ;q , P =r or
with the number buttons 0..9 .
Select the ' ' input field using
'VPS/PDC' (' ' lights up). If you press
'VPS/PDC' off (' ' goes out).
6
When all informations are correctly, confirm with
programming information is stored in a TIMER block.
7
Insert a cassette with an intact security tab (unprotected).
8
Switch off with STANDBY/ON m .
The programmed recording will only function when the video
recorder is
If any of the TIMER blocks are in use, ' k ' will light up on the video
recorder display.
OK
.
.
SqP
. Using
SELECT
with STANDBY/ON m .
Programming a recording (TIMER)
0..9
on the remote
SELECT
switch on
again, you will switch
OK . The