Setting The Time/Date On The Video Recorder; Basic Settings - Philips TL960A/00T Operating Instructions Manual

Setting the time/date on the video recorder

In all the steps below, press buttons
0-9
.
1
MENU/TRACKING
Press button
INGS in the main menu. Now press button
The word 'MENU' will appear in the display on the video
recorder during the next steps.
2
Set the current time (TIME).
When you enter minutes, seconds will automatically be
set to '0'.
3
OK
Now press button
Set the current date (DATE).
4
OK
Now press button
Now set the current month (MONTH).
5
OK
Now press button
Now set the current year (YEAR).
6
OK
Press button again, followed by
MENU/TRACKING
. You have now finished setting the
time and date.
7
MENU/TRACKING
Press button
menu.
TIME : 13:45
DATE : 28
MONTH: 02
YEAR : 98
------------------------
vw/0-9
8
TU
or digit buttons
. Select CLOCK SETT-
OK
.
again.
again.
again.
to exit from the main
OK/MENU

Basic settings

Define the basic settings on your appliance: input via SCART
or BNC socket, position of OSD, camera synchronisation and
locking function.
1
In the main menu, select the 'BASIC SETTINGS' line.
2
Select the 'SCART' or 'BNC' socket as the recording
source (REC SOURCE).
If no recording source has been connected or if the
recording source has been incorrectly selected in the
basic settings, 'NO VIDEO' appears in the display.
3
Select the position of the OSD (OSD POS): bottom left
(L-BOTTOM), bottom right (R-BOTTOM), top left (L-UP-
PER), top right (R-UPPER), OFF.
4
Select 'artificial synchronisation' (V SYNC) INT or EXT.
5
Select the lock function (SEC CODE) with (ON) or (OFF).
See the chapter 'Special Features' for more information.
BASIC SETTINGS
REC SOURCE BNC
RS 232 ON
OSD R-BOTTOM
V SYNC INT
BEEP N
PLAY MODE 24HA
SEC CODE OFF
------------------------
vw/S
Note:
* Always leave the video recorder connected to the
mains so as not to lose the basic settings.
OK/MENU