Auto Exposure Bracketing (Aeb) - Canon EOS Rebel Ti SERIES Instructions Manual

Auto Exposure Bracketing (AEB)

With AEB, the camera automatically changes the exposure within the
set range (up to + / – 2 stops in 1/2-stop increments) for three successive
frames.
AEB cannot be used with flash or bulb exposures.
• During AEB shooting, the <
to the <
• In the < > film advance mode, the camera will stop shooting automatically
after three shots.
• If the self-timer or remote control is used, the three AEB shots will be taken
in continuous succession automatically.
• AEB can be combined with exposure compensation.
46
2
AEB amount
AEB range
Correct
exposure
Decreased
exposure
Increased
exposure
> icon will blink.
1
Move the <
icon.
•
Look at the LCD panel and press the
< > button. (
Set the desired AEB amount.
•
Turn the <
The AEB amount and AEB range
< > are displayed on the LCD panel.
•
The sample illustration left
shows an AEB amount of 1 stop with
respect to the correct exposure level.
3 Take the picture.
The respective AEB amount is
displayed on the LCD panel and in the
viewfinder for each bracketed shot.
•
The picture will be taken in the current
film advance mode. (
•
After the three AEB shots are taken,
the AEB will not be canceled
automatically. To cancel AEB, set the
AEB amount back to "
> arrow mark and
> arrow to the <
)
> dial.
→
page 35)
".
< > AEB level icon next
>