NEC Express5800 Series User Manual page 287

Message
The driver failed to switch
Primary/Secondary state of the
IO module.
The driver started to bind the
Module.
The driver finished successfully
to bind the Module.
The driver failed to bind the
Module.
The driver accepted to remove
the Module.
The driver started to remove
the Module.
The driver finished successfully
to remove the Module.
The driver failed to remove the
Module.
The driver accepted to update
the BIOS.
The driver started to update the
BIOS.
The driver finished successfully
to update the BIOS.
The driver failed to update the
BIOS.
The error occurred on the
South Bridge.
FT nonfatal error occurrred.
The error occurred on the CPU
module.
The error occurred on the PCI
Express.
The driver detected that the
Module was not working.
DMA error occurred.
Legacy device error occurred.
Surprise remove occurred.
Meaning
The driver was unsuccessful to
change the primary/secondary
state of the IO module.
The driver started bindng the
CPU/IO module.
The driver successfully bounded
the module.
The driver was unsuccessful to
bind the module.
The driver received an instruction
to disconnect the module.
The driver started disconnecting
the module.
The driver successfully
disconnected the module.
The driver was unsuccessful to
disconnect the module.
The driver received an instruction
to update BIOS.
The driver started updating
BIOS.
The driver successfully updated
BIOS.
The driver was unsuccessful to
update BIOS.
There was a South Bridge error.
NEC GeminiEngine HA System
Controller detected an error.
There was a CPU module error.
There was a PCI Express error.
A module error was detected.
There was a DMA error.
There was a legacy device error.
Supprise removal occurred.
Troubleshooting 7-15
Action
There may be problem in
the hardware environment.
Contact your sales agent.
The server is operating
normally.
There may be problem in
the hardware environment.
Contact your sales agent.
The server is operating
normally.
There may be problem in
the hardware environment.
Contact your sales agent.
The server is operating
normally.
There may be problem in
the hardware environment.
Contact your sales agent.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.
There may be problem in
the hardware environment.
Contact your sales agent.