4-34 System Configuration
The following table provides information on options and their functions on the menu.
Option
Sync Transfer Rate
(MB/Sec)
Packetized
QAS
Initiate Wide Negotiation
Enable Disconnection
Send Start Unit Command
BIOS Multiple LUN Support
Include in BIOS Scan
Parameter
[320] 33.3
Typically, set "320." This value may need to be
changed depending on the option connected. For
160
20.0
more information, see the manual attached to the
80.0 10.0
option.
66.6 ASYN
40.0
[Yes]
Select whether or not to optimize the bus usage
ratio by using the function to transfer packetized
No
data (DT or dual transition).
[Yes]
Select whether or not to use the Quick Arbitration
and Selection(QAS) function, which improves the
No
SCSI bus usage ratio
If the connected SCSI device supports Wide
[Yes]
SCSI, select "Yes." If not, select "No."
No
[Yes]
Set "Yes."
No
[Yes]
Set "Yes" for a hard disk drive. Otherwise set
"No."
No
Set "No."
Yes
[No]
[Yes]
Set "Yes."
No
Description
[
]: Factory-set