Technical Support - NETGEAR FA311 Installation Manual

January 2006
Technical Specifications
Standards Compatibility IEEE 802.3U Fast Ethernet
IEEE 802.3 Ethernet
IEEE 802.3U Auto Negotiation
Autosensing PCI Plug and Play 2.1 or 2.2 Compatible
Interface Options RJ-45 Connector
Dimensions Dimensions: 5.7 x 3.7 in (14.4 x 9.3 cm)
Weight: 0.20 lbs (90 g)
Environmental Specifications
Operating Temperature: 0 to 40 degrees C
Operating Humidity: 10% to 90% noncondensing
Agency Compliance CE Mark
FCC, Part 15, Class B
EN 55 022 (CISPR 22) Class B
Canada ICES-003, Class B
VCCI Class B

Technical Support

Locate the serial number on the bottom label of your product and use it to register
your product at http://www.NETGEAR.com/register.
Registration on the Web site or over the phone is required before you can use our
telephone support service. The phone numbers for worldwide regional customer
support centers are on the Warranty and Support Information card that came with
your product.
Go to http://kbserver.netgear.com for product updates and Web support.
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your
Support information card.
E-mail: support@netgear.com
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Elec-
trical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of your jurisdiction implementing
the WEEE Directive.
© 2006 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of Netgear, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders.