Technical Support - NETGEAR WG311 Installation Manual

Windows 2000, Me/98SE Basic Installation
1
1
First, install the WG311 software.
a. Power on your desktop PC and log into the Windows
Operating System.
b. Insert the WG311 54 Mbps Wireless PCI Adapter Resource CD for
the WG311 into your CD-ROM drive. The CD main page
shown below will load.
c. Click the Install Driver & Utility link.
d. Follow the InstallShield Wizard steps, and click Finish when done.
2
2
Next, install the WG311 Wireless PCI Adapter.
a. Shut down the PC and remove its power cord. Insert the
WG311 Wireless PCI Adapter into an available PCI slot.
Reconnect the power cord and reboot the computer.
b. After a short delay, the Found New Hardware Wizard displays.
Note: If a Windows 2000 displays a Digital Signature Not
Found warning, click Yes to continue the installation.
When the installation is complete, you will see the WG311 system
tray icon on the lower right portion of the Windows task bar.
*201-10056-01*
2 0 1 - 1 0 0 5 6 - 0 1
3
3
Now, configure your WG311
a. Open the WG311 Smart Wireless Settings Utility by clicking on
the icon
Settings page.
b. Change the Network
Name SSID to match
your network.
Tip: As an alternative to
typing in the SSID, you
can use the Network tab
to view the available
wireless networks, and
double click on the
desired network.
c. Click Apply to activate the connection.
d. You can also enter a profile name and click on the Save Profile
button to store current settings.
4
4 Finally, verify wireless network connectivity.
Note: You can also use the Networks tab to verify the availability of
wireless networks and their SSIDs. Please see the Reference Manual on
the 54 Mbps Wireless PCI Card WG311 Resource CD.
a. Verify that your connection information matches your
wireless network.
b. Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see troubleshooting tips in
the Basic Installation section of the Reference Manual on the
WG311 54 Mbps Wireless PCI Adapter Resource CD.
December 2003
the Windows system tray. The utility opens to the

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD
THAT SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can
provide you with faster expert technical support and timely notices of
product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support
See Support information card for other countries.
E-mail: support@NETGEAR.com (24 x 7 online support)
www.NETGEAR.com
Attention: This device may be used throughout the
!
0470
European community. Some restrictions may apply
in France and Italy.
©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Everybody's
connecting, and Auto Uplink are trademarks or registered trademarks of Netgear in the
United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holder. Information is subject to change without
notice. All rights reserved.