Networks And The Internet - Samsung HT-E3550 User Manual

Settings

Networks and the Internet

When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's
software through the network connection.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, we recommend you use the Automatic
procedure below. If it is static, you must use the
Manual procedure that follows.
• Before you begin, confirm that the product is
connected to your router with a network cable.
K
Automatic
To start the configuration process, follow these
steps:
1 . In the Home menu, select Settings, and then
press the E button.
2 . Select Network, and then press the E
button.
3 . Select Wired Network Settings, and then
press the E button.
The Wired Network Settings screen appears.
►
4 . Press the button on the Internet Protocol
Setup menu.
▲▼
Use button to select Auto, and then
press the E button.
Settings
Wired Network Settings
Display
Internet Protocol Setup : Auto
Audio
IP Address : 0
Network
Subnet Mask : 0
System
Gateway : 0
Language
Security
DNS : Auto
General
DNS Server : 0
Support
> Move " Select
5 . The Network function acquires and fills in the
values for IP Address, Subnet Mask, etc.,
automatically.
28
|
English
6 . After the Network function has acquired
7 . Select Network Test, and then press E .
K
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1 . Follow the first four steps in the Automatic
2 . Press the
3 . Use the number buttons on your remote to
4 . When done with each field, use the ► button
5 . Enter the IP Address, Subnet Mask, and
\
6 . Press the ▼ button to go to DNS.
0 0 0
0 0 0
7 . Press the ▼ button to go to the first DNS
0 0 0
8 . Press the RETURN ( ' ) button on your
0 0 0
'
Return
the network values, press the RETURN ( ' )
button.
The home cinema validates the network
connection. When it is done, press the
RETURN ( ' ) button.
Manual
Settings
Wired Network Settings
Display
Internet Protocol Setup : Manual
Audio
IP Address : 0 0
Network
Subnet Mask : 255 255 255
System
Gateway : 0 0
Language
Security
DNS : Manual
General
DNS Server : 0 0
Support
> Move " Select
procedure, but select Manual instead of Auto
in Step 4.
▼
button to go to the first entry
field (IP Address).
enter numbers.
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Gateway values.
entry field. Enter the numbers as above.
remote.
\
0 0
0
0 0
0 0
'
Return