Networks And The Internet - Samsung HT-FM45 User Manual

Language
Lets you select the language you prefer for the On-
Screen Menu, disc menu, etc.
• The selected language will only appear if it is
supported on the disc.
Security
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created your
own PIN.
Restricts playback of Blu-ray Discs
BD Parental with a rating equal to or above a
Rating specific age rating unless the PIN is
entered.
Prevents playback of DVDs with a
DVD Parental
rating above a specific numerical
Rating
rating unless the PIN is entered.
Changes the 4-digit PIN used to
Change PIN
access security functions.
General
Lets you specify the time zone that
Time Zone
is applicable to your area.
Support
For more information about the
Software
Software Upgrade function, see
Upgrade
"Upgrading Software" on page 20.
Contact Provides contact information for
Samsung assistance with your product.
Terms of View the general disclaimer
Service regarding third party contents and
Agreement services.
All settings will revert to the default
Reset except for the network settings. The
default security password is 0000.

Networks and the Internet

When you connect this product to a network, you can
use network based applications and functions such as
BD-LIVE and upgrade the product's software through the
network connection.
Configuring Your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
theater's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below. If it
is static, you must use the manual procedure that follows.
• Before you begin, confirm that the product is
connected to your router with a network cable.
K
Automatic
To start the configuration process, follow these steps:
1. In the Home menu, select Settings, and then press
the E button.
Select Network, and then press the E button.
2.
3. Select Wired Network Settings, and then press
the E button.
The Wired Network Settings screen appears.
►
4.
Press the button on the Internet Protocol Setup
menu.
▲▼
Use button to select Auto, and then press the
E button.
Settings
Wired Network Settings
Display
Internet Protocol Setup : Auto
Audio
IP Address
Network
Subnet Mask
System
Gateway
Language
Security
DNS
General
DNS Server
Support
> Move
5. The Network function acquires and fills in the values
for IP Address, Subnet Mask, etc., automatically.
6. After the Network function has acquired the network
values, press the RETURN ( ' ) button.
Select Network Test, and then press E . The
7.
home theater validates the network connection.
When it is done, press the RETURN ( ' ) button.
K
Manual
If you have a static IP address or the Automatic procedure
does not work, you'll need to set the Network Settings
values manually. You can get the Network Settings from
your Internet Service Provider (ISP).
\
: 0 0 0 0
: 0 0 0 0
: 0 0 0 0
: Auto
: 0 0 0 0
'
" Select
Return
19
English
|