Feed Amount; Maximum And Minimum Lengths - Brother RJ-4030 Software Manual

2.3.3 Feed amount

The feed amount (left and right margins) is defined below.
Type
Continuous length tape
Die-cut labels

2.3.4 Maximum and minimum lengths

The maximum and minimum lengths are defined below.
Type
Device Capabilities
Value of DC_MINEXTENT
Continuous length tape
Die-cut labels
Minimum Margin Setting
3 mm
0.12"
24 dots
The length offset indicated in "(b) Die-cut labels" of
is used.
However, set "0" as the value of the "specify margin amount"
command.
Minimum Length
25.4 mm
204 dots
25.4 mm
204 dots
Fixed
- 14 -
Raster Command Reference
Maximum Margin Setting
127 mm
5"
1020 dots
"2.3.2 Page
Maximum Length
3000 mm
24094 dots
3000 mm
24094 dots
Fixed
2. Print Data
size"