Brother RJ-4030 Software Manual page 24

Step 5: With the P-touch Template 2.0 commands, select the assigned number for the bitmap file.
After using the P-touch Template Settings tool in Step 4, the remaining three commands must be sent to
the printer.
(1) Initialize P-touch Template
(2) Select the bitmap file to be printed.
In order to select the bitmap file, enter a specific character
"\" and the value one less than the assigned number for the
bitmap file that is shown in Step 3.
For example, if the assigned number for the bitmap file is 2,
enter \01 as shown right.
(3) Start printing.
When the printer receives the command above, the label below is printed.
Entered command
Entered command
Entered command
- 18 -
3. Examples for Using Commands
P-touch Template 2.0 Command Reference
^II
\01
^FF