Horizon Fitness LIMITED LS780T User Manual page 7

AS SE MB LY ST EP 
HARDWARE BAG  CONTENTS :
SET SCREW (I)
12 mm
Qty: 4
HANDLEBARS
A Open HARDWARE BAG .
B Attach LEFT HANDLEBAR to CONSOLE using 2 SCREWS (I) .
C Repeat on other side.
12
LS780T_Rev.1.3.indd 12-13
BOLT (J) SPRING WASHER (K) ARC WASHER (L)
100 mm 15.4 mm 18 mm
Qty: 2 Qty: 2 Qty: 2
CONSOLE
SET SCREWS (I)
ASSEMBLY STEP  (CONTINUED)
HARDWARE BAG  CONTENTS :
SET SCREW (I) BOLT (J)
12 mm 100 mm
Qty: 4 Qty: 2
BOLT (J)
SPRING WASHER (K)
ARC WASHER (L)
CONSOLE MAST
HANDLEBAR
A Continue using HARDWARE BAG .
B Fasten LEFT HANDLEBAR to CONSOLE MAST using 1 BOLT (J), 1 SPRING WASHER (K) and 1
ARC WASHER (L).
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
C Repeat on other side.
POWER SWITCH CIRCUIT BREAKER
YOU'RE FINISHED!
SPRING WASHER (K) ARC WASHER (L)
15.4 mm 18 mm
Qty: 2 Qty: 2
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will light up.
1
6/2/08 4:40:35 PM