Connections
Chapter 2:
Connections
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting the FM antenna
Connect the FM antenna plug onto the center pin of the FM
1
antenna socket.
FM wire antenna (supplied)
This unit's rear panel
Connecting USB storage devices
This unit's front panel
USB storage device
(commercially available)
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.
ANTENNA
LAN
VIDEO
DC IN
FM75
(10/100)
OUT
19 V
Connecting your TV
To watch iPod/iPhone images on a television, connect it
using a composite video cable.
• When an iPod/iPhone is connected to this unit, the TV
output setting of the iPod/iPhone is automatically set to
2
'ON'.
This unit's rear panel
(commercially available)
TV
ANTENNA
LAN
VIDEO
DC IN
FM75
(10/100)
OUT
19 V
Video cable
Yellow
To video input
terminals
02
7
En