Honeywell ST 3000 Specification And Model Selection Manual page 20

34-ST-03-64
Page 20
Model Selection Guide
34-ST-16-32 Issue 39
Instructions
●
Select the desired Key Number. The arrow to the right marks the selection available.
●
Make one selection from each Table I and II using the column below the proper arrow.
●
Select as many Table III options as desired (if no options or approvals are desired, specify 9X).
● ●
A ( ) denotes unrestricted availability. A letter denotes restricted availability.
●
Restrictions follow Table IV.
Key Number
_ _ _ _ _ _ -
KEY NUMBER
0-10" to 0-400" H O/0-25 to 0-1,000 mbar
2
Body Rating*: 2,500 psi (172 bar) Compound Characterized
0-5 to 0-100 psi/0-0.34 to 0-7 bar
Body Rating*: 2,500 psi (172 bar)
0-5 to 0-500 psia/0-0.34 to 0-35 bar
Body Rating*: 500 psi (35 bar)
0-5 to 0-500 psi/0-0.34 bar to 0-35 bar
Body Rating*: 500 psi (35 bar)
0-100 to 0-3,000 psi/0-7 bar to 210 bar
Body Rating*: 3,000 psi (210 bar)
* Remote seal system pressure rating is body rating or seal rating, whichever is less.
Base STR models no longer include a default communications option. All units now require the
Important Note:
selection of a communication option from Table III (AN, DE, HC, H6 or FF).
TABLE I - METER BODY
Number of Seals
Fill Fluid
(Meter body)
Construction
In-Line Gauge
Dual Head DP
Single Head
Absolute
In-Line Gauge
Model Selection Guide (34-ST-16-32)
I II
_ _ _ - _ _ _ _ _ _ _ _ _ _ _ _
Description
1 Remote Seal (High Side)
2 Remote Seals
1 Remote Seal (Low Side)
Value Added Model (VAM unit)
Silicone (DC 200)
CTFE
Non-Wetted Adapter Head Material
316 SS Bonnet
316 SS Bonnet for Close-Couple
316 SS (bolt-on heads)
316 SS for Close-Couple
316 SS with all-welded meter body
316 SS Adapter Head
316 SS Head for Close-Couple
Dual Head DP
III (Optional)
XXXX
- _ _ , _ _ +
Selection
STR12D
STR13D
STR14A
STR14G
STR17G
Selection
1 _ _
2 _ _
3 _ _
5 _ _
_ 1 _
_ 2 _
_ _ A
_ _ D
_ _ A
_ _ D
_ _ C
_ _ A
_ _ D
All welded
IV
Availability
● ● ●
●
●
8 8 8
● ● ●
q q q
●
y
●
y
7
●
y