NEC Express5800 series User Manual page 100

4-56
Configuring Your Storage and I/O Blade
4.
Check to "Make Global HSP" or select the DG you want to specify as Hot Spare and
check to "Make Dedicated HSP", and then click [Go] on the lower center of the screen.
Global HSP
Dedicated HSP
5.
The status for the newly connected Hard Disk Drive changes to "GL HOTSPARE" or
"DED HOTSPARE".
Indicates the Hot Spare available for all DGs.
Indicates the Hot Spare available only for the specific DG.
You need to specify the target DG.
– Check to "Make Global HSP" check
box.
Or, select the DG you want to specify
as Hot Spare and check to "Make
Dedicated HSP" check box.