Getting Started
Connecting the LCD Display
Cable System or VHF/UHF Antenna System
• We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial
cable (not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming, as shown below.
Cable
Antenna
☼
• Remember to set the Source setting in the Channel menu to Air or Cable for the type you
choose.
HD Cable Box/HD Satellite Box
You can also enjoy high-definition programming by subscribing to a high-definition cable
service or a high-definition satellite service. For the optimum picture quality, be sure to
connect this device to your Display via the HDMI or component video (with audio) input on
the back of your LCD Display.
HDMI Connection
Rear of Display
ViewSonic
A-B RF switch
HDMI cable
12
Rear of Display
VHF/UHF/CABLE input
Rear of Display
VHF/UHF/CABLE input
HD cable box/
HD satellite box
Cable/Satellite
antenna cable
VT2430