One Of The Following Fault Messages Appears In The Display - Miele W 5922 Operating Instructions Manual

Problem solving guide

One of the following fault messages appears in the display

Fault message
Fault
Water intake
Open stopcock
Fault
2
Check drainage
system
Waterproof system
activated
Close the stopcock
Technical fault xxx
Call Service
To switch off the fault message: Switch the machine off with the K button.
1)
46
Possible cause
The water inlet is
blocked or
restricted.
– The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
The water protection
system has reacted.
There is a fault.
Remedy
Check whether
– the stopcock is
opened properly.
– the inlet hose is kinked.
– the water pressure is
too low.
– Clean the drain filter
and the drain pump.
– The maximum delivery
head is 1 m.
– Close the stopcock.
– Call the Service
Department.
Start the programme
again.
If the fault message
appears again, contact
the Service Department.
1)