Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 5922 Operating Instructions Manual

Spinning

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Silks
Express 20
Hygiene
Automatic plus
Shirts
Denim
Separate rinse
Drain / Spin
Dark garments
Sportswear
Trainers*
Outerwear*
Proofing
Soft toys
First wash
Pillows*
Curtains
Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
26

Rinse and interim spin

There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1600
final spin speed will also reduce the
1200
interim spin speed. In some
600
programmes, an additional rinse is
1200
introduced if a spin speed of less than
700 rpm is selected.
600
1600

To omit the final spin (Rinse hold)

1600
^ Press the Further extras 4 button
1200
and select the Rinse hold option.
600
900
– To start the final spin and end the
programme:
1600
1600
The washing machine will display the
1200
maximum spin speed possible. You
can use the X button to select a
1200
lower spin speed. Start the final spin
1000
by pressing the Start/Stop button.
800
1000 – To end the programme without the
final spin:
900
1200
Press the Door button. The water will
drain away. Press the Door button
1200
again to open the door.
600
1600
To omit rinse and interim spin and
the final spin (No spin)
^ Select No ..
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage. With some
programmes an additional rinse is
introduced if this setting is selected.