Honeywell SDC Operating Instructions Manual page 53

SDC / DHC
4.2.3.3.1
Setting
Setting range
Factory setting
4.2.3.3.2
Setting
Setting range
Factory setting
EN2H-0220GE51 R0308
Individualised daytime room temperature for each heating
circuit
¥
► Press button.
► Select desired heating circuit (HC, MC-1 or MC-2) by turning
the input button
C
► Confirm selected circuit by pressing the input button
► Set flashing room temperature specification to the desired
value by turning the input button
► Confirm set value by pressing the
Alternative: Automatic acceptance of the value after the set
information time (see 4.1.2.7 "System information" button, pg. 26).
5 ... 30 °C
20 °C
Pos: 48 /156-Honeywell/Bedienung/Individuelle_Nacht-Raum temperatur @ 1\m od_1207646643760_6.doc @ 9870
Individualised night-time room temperature for each heating
circuit
¦
► Press button.
► Select desired heating circuit (HC, MC-1 or MC-2) by turning
the input button
C
► Confirm selected circuit by pressing the input button
► Set flashing room temperature specification to the desired
value by turning the input button
► Confirm set value by pressing the
Alternative: Automatic acceptance of the value after the set
information time (see 4.1.2.7 "System information" button, pg. 26).
5 ... 30 °C
16 °C
Pos: 49 /156-Honeywell/Bedienung/Individuelle_Betriebsart @ 1\m od_1207646682213_6.doc @ 9885
î
.
î
¥
î
.
î
¦
î
.
button.
î
.
button.
Operation
.
.
53