Mitsubishi DX-TL308E Installation Manual page 130

Error indications (continued)
<Information> (continued)
Display
Copy stopped because the copy source
data were overwritten.
Archive stopped because the copy source
data were overwritten.
Copy source data are about to be
overwritten.
Stop recording if you want to continue
copying.
Archive source data are about to be
overwritten.
Stop recording if you want to continue
archive.
Copy HDD error
Cannot copy the data.
Check the copy destination HDD.
Archive HDD error
Cannot archive the data.
Check the archive destination HDD.
DVD/CD drive was not found.
Not connected or unusable.
Connect a proper DVD/CD drive.
No USB memory was found.
No USB memory or unusable memory is
inserted. Use proper USB memory and
connect it correctly.
Menu data cannot be read out.
<Warning>
Display
Remaining capacity of HDD (Normal) is
running short.
Remain **%*3
Remaining capacity of HDD (Alarm) is
running short.
Remain **%*3
Remaining capacity of HDD (EMR) is
running short.
Remain **%*3
Remaining capacity of HDD (Archive) is
running short.
Remain **%*3
Remaining capacity of HDD (Normal) is
0%.
Remaining capacity of HDD (Alarm) is 0%.
Remaining capacity of HDD (EMR) is 0%.
Remaining capacity of HDD (Copy) is 0%.
Remaining capacity of HDD (Archive) is
0%.
Recorder skipped the defect area and
resumed recording.
Recorder resumed recording to the next
HDD.
130
Call-out
Cause
Code signal
output*1
· The data being copied
LOG3500*5
None
or archived are
overwritten.
LOG7500*6
· The data being copied
LOG3600*5
None
or archived are about to
be overwritten.
LOG7600*6
LOG3707*5 · The copy/archive
None
destination HDD is not
found.
· There is no free space
left in the copy/archive
LOG7707*6
destination HDD.
· The DVD/CD drive is not
LOG3708
None
connected yet or a drive
of wrong type is
connected.
LOG3705 · No USB memory is
None
inserted for copying or a
USB memory of wrong
type is inserted.
· The menu data cannot
LOG3706
None
be read out.
Call-out
Cause
Code
signal
output*1
Selectable
· The remaining capacity
LOG1200
of the HDD reaches the
value set by [Call-out].
LOG1201
LOG1202
LOG7200
Selectable
· The free space in the
LOG1100*4
HDD runs out with
[Call-out] set to 0%. (It is
LOG1101*4
not output when the repeat
LOG1102
recording is enabled.)
· The free space in the
None
LOG3100
copy or archive device
LOG7100 Selectable
runs out.
· A temporary failure or
LOG56 *8 Selectable
malfunction occurs in the
HDD.
LOG57 *8
Remedy
· To continue copying/archiving, stop
recording.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
· To continue copying/archiving, stop
recording.
· To continue recording, stop
copying/archiving.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
information screen to clear the warning.
Remedy
· Press the WARNING RESET button on the
front panel or click the [X] button on the
warning indication to clear the warning.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
warning indication to clear the warning.
· When the warning is cleared, the recorder
overwrites data from the oldest.
· Press the WARNING RESET button on the
front panel or click the [X] button on the
warning indication to clear the warning.
· Replace the medium with a new one.
· Check whether the HDD has no
malfunction.
Warning
Page
level*2
Normal 75-78
Normal 75-78
Normal
75-78
Normal -
Normal
-
Normal 107
Warning
Page
level*2
Normal
99
Normal
38, 99
Normal
99
Minor
-