Bypass Tray - Sharp MX-2300N Copier Manual

Bypass Tray Type/Size Setting
Select the paper type.
Plain Letter Head
5
Pre-Printed Pre-Punched
Recycled
Bypass Tray Type/Size Setting
Type
Plain
Custom Size
6
Bypass Tray Type/Size Setting
Type
Plain
Custom Size
Paper Select
A4
A4R
7
B4
A3
8
To cancel scanning of the original and copying...
Press the [STOP] key (
Thin Paper Transparency
Heavy Paper Tab Paper
Colour Labels Envelope
Type
Size
12x18,11x17,8 x14
1 / 2
Auto-Inch
8 x11,8 x11R,5 x8 R 1 / 2 1 / 2 1 / 2 1 / 2
7 x10 R,A3,A4,B4,B5 1 / 4 1 / 2
A3W,A3,A4,A4R,A5R,B4
Auto-AB
B5,B5R,216x330(8 x13) 1 / 2
11x17,8 x11
1 / 2
X420 Y297
Type
Auto-Inch
((148 432)
X 17
mm
Auto-AB
(100 297)
Y Y
11
mm
AB
A4
Plain
Tab Paper
Plain
Plain
Plain
(1)
or
).
Select the type of paper used in the
Cancel

bypass tray.

1/2
Select the paper type used.
1/2
Set the paper size.
OK
8K
Touch the [Auto-AB] key, the [Auto-Inch] key, or the [Custom
Size] key. To use a paper size used in China, touch [8K], [16K],
16K
or [16KR]. After selecting the setting, touch the [OK] key.
16KR
[Auto-Inch] key
2/2
Touch this key when the loaded paper is an inch size (8-1/2" x 11",
etc.). When the paper placed in the bypass tray is an inch size, the
paper size will be detected automatically and an appropriate size set.
[Auto-AB] key
Touch this key when the loaded paper is an AB size (A4, etc.).
When the paper inserted in the bypass tray is an AB size, the
paper size will be detected automatically and an appropriate
size set.
[Custom Size] key
OK
Touch this key when you know the size of the inserted paper
OK
but it is not one of the inch or AB sizes.
When the key is touched, the paper size entry screen appears.
To set a paper size in millimetres, touch the [AB] tab.
To set a paper size in inches, touch the [Inch] tab.
Inch
Touch the [X] key and enter the horizontal dimension of the
paper with the
enter the vertical dimension. When finished, touch the [OK] key.
Select the bypass tray.
OK
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the job
detail setting screen. Touch the [Job Detail Setting] key to
(2)
return to the base screen of copy mode.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key (
Scanning begins.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you placed the original on the document glass, scan each
page one page at a time. If you are using the sort function or
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
47
keys, and then touch the [Y] key and
)
).