Storing A Job Program - Sharp MX-2300N Copier Manual

STORING A JOB PROGRAM

The procedure for storing copy settings in a job program is explained below.
1
Job Programs
Press program number.
1
2
5
Recall
Job Programs
Press program number.
1
5
Recall
3
If a highlighted numeric key is touched, the following screen appears.
The [Store] key can be touched to delete the stored settings and store new settings.
When "Disabling Deletion of Job Programs" is enabled in the system settings (administrator), this function cannot be used.
To store, make selections and press
[OK], to delete, press [Cancel].
Full Colour
Colour Mode
Job Detail
Settings
Auto
Exposure
4
100%
Copy Ratio
The number of copies cannot be stored.
LOGOUT
2 3 4
6 7 8
Store/Delete
2
3 4
6 7 8
Store/Delete
Cancel
2-Sided Copy
Original
A4
Plain
A4
A4
1.
A4
A4R
2.
B4
3.
A3
4.
Program Name
Press the [PROGRAM] key (
Touch the [Store/Delete] tab.
Exit
1/6
Touch a numeric key that is not
Exit
highlighted.
1/6
Numeric keys in which job programs are already stored are
highlighted.
A job program has been already stored
in this location.
Cancel Delete
Select the copy settings that you wish to
OK
store in the job program and touch the
[OK] key.
Output
To assign a name to the program, touch the [Program Name]
key. A text entry screen will appear.
Up to 10 characters can be entered for the name.
To enter text, see "6. ENTERING TEXT" in the User's Guide.
When you have finished entering the name, touch the [OK] key.
158
Store
).