The "Agent Snmp Config Users" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
6.3.5.22

The "Agent SNMP Config Users" WBM menu

Agent SNMP Configuration Users
Here, you can create or remove users for access via SNMPv3.
When you create a user, you assign it to a previously created group. You also need to set
the required passwords and the authentication algorithm.
The relevant user names are the defaults for the passwords.
Figure 6-27
Syntax of the Command Line Interface
Table 6- 19
Command
info
add <user> <group> [NONE |
MD5 | SHA] [Authpass]
[Privpass]
202
Agent SNMP Config Users screen
Agent SNMP Configuration Users - CLI\AGENT\SNMP\USER>
Description
Displays a list of all created
SNMPv3 users.
Adds a new SNMPv3 user to a
user group.
Comment
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200