6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
6.3.5.9
The "System Passwords" WBM menu
System Passwords
In this dialog, if you are the administrator, you can change the passwords for Admin and
User. The password can be up to a maximum of 16 characters (7-bit ASCII) long.
You apply your settings with "Set Value".
Note
Default password when supplied
For Admin: admin
For the user: user.
Figure 6-15
Table 6- 9
Command
password <admin ¦ user>
<password>
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
"System Passwords" dialog
System Passwords - CLI\SYSTEM>
Description
Sets a new password for the
user or administrator.
Configuration / diagnostics using remote mechanisms
Comment
Administrator only.
179