Cisco Catalyst 3120 Software Manual page 61

Chapter 1 Overview
• Dynamic ARP inspection is disabled on all VLANs. For more information, see
"Configuring Dynamic ARP Inspection."
• IGMP snooping is enabled. No IGMP filters are applied. For more information, see
"Configuring IGMP Snooping and MVR."
• IGMP throttling setting is deny. For more information, see
Snooping and MVR."
The IGMP snooping querier feature is disabled. For more information, see
•
IGMP Snooping and MVR."
MVR is disabled. For more information, see
•
• Port-based traffic
–
–
–
–
• CDP is enabled. For more information, see
• UDLD is disabled. For more information, see
• SPAN and RSPAN are disabled. For more information, see
RSPAN."
• RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
•
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
•
No ACLs are configured. For more information, see
•
with ACLs."
QoS is disabled. For more information, see
•
No EtherChannels are configured. For more information, see
•
EtherChannels and Link-State Tracking."
IP unicast routing is disabled. For more information, see
•
Routing."
No HSRP groups are configured. For more information, see
•
IP multicast routing is disabled on all interfaces. For more information, see
•
"Configuring IP Multicast Routing."
MSDP is disabled. For more information, see
•
Fallback bridging is not configured. For more information, see
•
Bridging."
OL-12247-01
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 25, "Configuring Port-Based Traffic Control."
No protected ports are defined. For more information, see
Traffic Control."
Unicast and multicast traffic flooding is not blocked. For more information, see
"Configuring Port-Based Traffic Control."
No secure ports are configured. For more information, see
Traffic Control."
Default Settings After Initial Switch Configuration
Chapter 23, "Configuring IGMP Snooping and MVR."
Chapter 26, "Configuring CDP."
Chapter 28, "Configuring UDLD."
Chapter 30, "Configuring RMON."
Chapter 34, "Configuring Network Security
Chapter 36, "Configuring QoS."
Chapter 45, "Configuring MSDP."
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
Chapter 22,
Chapter 23, "Configuring IGMP
Chapter 23, "Configuring
Chapter 25, "Configuring Port-Based
Chapter 25, "Configuring Port-Based
Chapter 29, "Configuring SPAN and
Chapter 32, "Configuring SNMP."
Chapter 37, "Configuring
Chapter 38, "Configuring IP Unicast
Chapter 40, "Configuring HSRP."
Chapter 44,
Chapter 46, "Configuring Fallback
Chapter 23,
Chapter 25,
Chapter 31,
1-15