Installation
Setting Up the Tabletop Model
Library tabletop models require no mechanical assembly for mounting (see
Figure
Make sure the cooling grills at the front and the fans at the rear of the library are
not obstructed. Allow 18 inches (50 cm) of clearance at the front and rear for
magazine and hot-plug tape drive access without the need to reposition the library.
Note:
forward or rearward to access the hot-plug drive shoes and magazines, respectively.
(50 cm)
Figure 10: Tabletop model clearances (two-drive model shown)
40
10). Place the library on a desk, table, or other stable, horizontal surface.
To reduce tabletop clearance requirements, temporarily move the library
18"
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
18"
(50 cm)