Hp C-Class Bladesystem Enclosure Architecture - Cisco Catalyst 3120 Hardware Installation Manual

Chapter 2 Switch Installation

HP c-Class BladeSystem Enclosure Architecture

Figure 2-1
Figure 2-1
1
2
3
5
7
9
11
2
1
2
3
4
5
6
Consider these prerequisites before installing your switch module:
•
•
•
•
OL-12246-01
shows the rear view of the blade enclosure in which you install the switch module.
Rear View of the Blade Enclosure
Blade enclosure rear view
Blade enclosure fans
Interconnect bay 1 with switch module installed 9
Interconnect module bay 2
Interconnect module bay 3
Interconnect module bay 4
Plan for optimal airflow.
Fill any unoccupied server slot bays or power module bays with blanks.
Bays 1 through 8 are available for Ethernet switch modules.
See the server enclosure documentation for information on the port mapping between blade
enclosures and the switch modules.
HP c-Class BladeSystem Enclosure Architecture
7 Interconnect module bay 5
8
Interconnect module bay 6
Interconnect module bay 7
10 Interconnect module bay 8
11 Onboard Administrator module
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
4
6
8
10
2-5