Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
The procedure to set the user to access the SNMP Agent is as follows:
Procedure
1
2
3
Click [Setup SNMP User] in [Action].
Click the [Add] button.
Click the [User Name] link to edit the existing user.
Enter or edit the user information, and click the [OK] button.
•
User Name
Enter the user name which accesses the SNMP Agent.
The user name which has already been used cannot be entered.
The following input conditions apply:
-
8 - 32 alphanumeric characters and symbols
-
"! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+
(plus)", "- (hyphen)", "* (asterisk)" and "/ (slash)" can be used
-
Spaces
•
MIB View Setting
Select the view name to specify the MIB access range for the user.
A "blank" means accessing the MIB is not allowed.
•
Authentication
Select whether to enable or disable the authentication.
•
Authentication Method
When enabling authentication, select the authentication method from "MD5" (Message
Digest 5) or "SHA" (Secure Hash Algorithm).
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
472
P2X0-1090-02ENZ0
Advertisement
Table of Contents
