Fujitsu Eternus DX60 User Manual page 89

Chapter 5 Installation
5.2 Rack Installation
Do
CAUTION
• Make sure to wear a wrist strap before starting each operation, as
failure to discharge static electricity may cause a device failure.
Do not remove it until the operation is complete.
• If components are installed in a way other as described herein,
damage and/or device failure or electrical shock may occur.
• Do not install the ETERNUS DX60/DX80/DX90 with cables, such as
power cords, connected.
• This device contains delicate components, and should be handled
gently. Do not drop or knock the device against the rack when
installing it. Also, do not knock the other devices installed in the
rack.
• If no other components are installed, attach the blind panels
provided with the rack.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
89
P3AM-3042-08ENZ0