Fujitsu Eternus DX60 User Manual page 136

Chapter 6 Cable Connection
6.7 Power Cord Connection
5
CAUTION
•
•
Turn the main line switch of the AC outlet box to the "ON" position (marked "I").
When the main line switch
When turning the main line switch to "On" (marked "I") right after
IMPORTANT
turning the main line switch to "Off" (marked "O"), turn it back to "On"
(marked "I") after the STATUS LED of the power supply unit has
turned off completely.
(It takes about ten seconds for the STATUS LED to be turned off
completely.)
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Do Not
Do not overload an electrical outlet. Doing so may lead to
electric shock or fire.
Unplug
If the ETERNUS DX60/DX80/DX90 is not going to be used for
a long period of time, it is advisable to unplug all power cords
to avoid any chance of fire to the ETERNUS DX60/DX80/
DX90 and its peripherals.
is ON
136
End of procedure
P3AM-3042-08ENZ0