Page 1
User ’ s Manual MVGA-NVG11A MVGA-NVG11P MVGA-NVG11AL MVGA-NVG11AT MVGA-NVG11PT MVGA-NVG11AM MVGA-NVG11AD DOC NO: 54-0NV11-05 Rev.D 01/02/21...
Page 2
FCC Requirement This device has been certified to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of the FCC Rules. See instructions if interference to radio reception is suspected. WARNING: This equipment generates and uses radio frequency energy and, if not installed or used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio or television reception.
Page 3
Notice The information in this document is subject to change in order to improve reliability, design, or function without prior notice and does not represent a commitment on the part of this company. In no event will we be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or the inability to use the product or documentation, even if advised of the possibility of such damages.
1. Introduction The MVGA-NVG11A/P/AL/AT/PT/AM/AD is the 3D graphics processors and multimedia controller. Its innovative architectures combine, transform, and light technology with a rendering engine that delivers 4 pixels per clock. The nVIDIA GeForce2 MX not only speed up graphics processing for richer 3D graphics, it also frees up CPU bandwidth, to the computer systems use, by incorporating GeForce2 MX break-through 3D architecture.
Note: Before installing your new VGA card, you must first set the VGA option to either Standard VGA or Standard Display VGA. 2. Remove your old graphics card, and install your new VGA card into the AGP slot. MVGA-NVG11A MVGA-NVG11P MVGA-NAG11AL MVGA-NVG11PT...
3. Software Installation After installing the VGA card in your computer, please turn on your PC, and your computer will be automatically detected. 3.1 Installing driver on Windows 98SE/ME Please set the VGA card as ‘Standar d PCI Gr aphics Adapter (VGA)’. When asked if you want to restart your PC, click ‘...
3.3 View User's manual Click ‘User ’s Manual’ to view detailed information regarding the various Drivers/Programs and FAQ located on the CD. 3.4 Installing driver on Windows 2000 Please set the VGA card as ‘Video Contr oller (VGA Compatible)’. When asked if you want to restart your PC, click ‘No’.
3.5.1 How to enable the TV-OUT function The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV input. Connect the signal cable between TV-OUT at VGA card and TV's Video input, and turn on the TV before launch ‘ Display War ning: Properties’...
Page 18
3.5.2 How to change TV setting? 1. You can click ‘TV’ to switch VGA output to A. Click ‘Change TV For mat’ to select which standard TV you want. When you select ‘Make this for mat the power -up default’; the system will change BIOS default to the format when you boot-up it next time.
Page 19
3.5.3 How to adjustment screen position? 1. Click on ‘Display’ icon at Control Panel. Select ‘Settings’ tab and click ‘Advanced Pr oper ties’. You will see the window. A. When the output of your VGA is set to Monitor, You can click ‘Device Setting’ to adjust the screen position WARNING: The Monitor display may become...
3.6 How to change output to Digital Flat Panel? 1. A. You can select ‘ ’ Digital Flat Panel switch VGA output to Digital Flat Panel. B. Click ‘ ’ ‘ ’ Apply to switch your display device. 2. Click ‘OK’ to make sure. 3.
3.7 TwinView Function instructions 3.7.1 Extended Mode 1. A. You can select ‘Extended Desktop’ to add second device output of Extended desktop. B. Click ‘OK’ or ‘Apply’ to switch your display mode. 2. When asked if you want to restart your PC, click ‘Yes’...
3.7.2 Clone mode 1. A. You can select ‘Clone’ to add second device Output of clone. B. Click ‘OK’ or ‘Apply’ to switch your display mode. 2. When asked if you want to restart your PC, click ‘Yes’ to finish the settings and reboot your Windows.
A: Please check your monitor’ s specifications. Some monitors connect the DDC signal to ground: Which causes the BIOS not to detect your monitor. Therefore, causing your MVGA-NVG11A/P /AL/AT/PT not to receive any data or refresh rates. Q: The image on my monitor keeps on flickering and the driver can't change the refresh-rate.
Page 25
Q: TV-OUT is grayed out on my TV-OUT capable MVGA-NVG11A/P /AL/AT/PT. How can I fix it? A: 1. The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV input. However, not all TVs have this, and some have a switch labeled ‘Ter minate’...
Page 26
Q: When I install the 5.xx series of drives Windows 9x locks up at the bootup screen. How can I fix it? A: Make sure your MVGA-NVG11A/P/AL/AT/PT is not sharing an IRQ with any other devices. If you find that it is, try either moving the device into another PCI slot, or reassigning the PCI IRQs in the BIOS.
Page 27
Q: I can't get my system to work with AGP4X. It only can work in AGP2X. A: 1. You must enable AGP in 4X mode in BIOS of motherboard. 2. You need to confirm motherboard have support AGP 4X mode. 3.