Checking The Adjustments - Pioneer RM-V2550 Manual

Multi projection unit / projection screen kit / multi video processor / projection stand
Table of Contents

Advertisement

3. CHECKING THE ADJUSTMENTS

1. Preparation for adjustments
1 Connect the power supply as well as the input signal cables and ABL interlock cables (control cables).
2 Arrange the connected cables neatly.
3 After completing 1 and 2 above, turn power ON and leave the system for about an hour for aging.
4 Prepare the signals required for the adjustments.
2. Before adjustments (Setup of conditions) .............................................. P.80
1 Select the remote control adjustments or PC adjustments.
2 Check the TV system setups.
Check the convergence memory and white balance memory for use in the adjustments.
3 Check the STATUS.
Check the MULTI ON/OFF, COMBINATION ON/OFF, ABL interlock switch setup (one of 3 positions) and other
status.
4 Store the current setups using the last memory function.
3. ID assignment............................................................................................ P.83
1 Assign an ID to each MPJ by observing the caution and notes on page 83 to 87.
4. Screen adjustments
1 Adjust the size of each screen. ......................................................................................................................... P.92
2 Adjust the convergence of each screen. .......................................................................................................... P.96
3 Adjust the connection between screens. ....................................................................................................... P.153
4 Adjust the W/B of each screen. ....................................................................................................................... P.110
5 Adjust the ABL level. ....................................................................................................................................... P.114
6 Adjust the colors using the image to be transmitted. .................................................................................. P.115
7 Perform overall check by observing the entire image. ................................................................................. P.115
PRECAUTIONS
ID=01
ID=02
ID=03
ID=04
149

Advertisement

Table of Contents
loading

Table of Contents