GE Profile 22 Installation And Owner's Manual page 29

Installation Instructions
INSTALLINGTHE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where
the temperature will go below 60°F (16°C)
because it will not run often enough to maintain
proper temperatures.
• Do not install the refrigerator where
the temperature will go above 100°F (37°C)
because it will not perform properly.
• Install it on a floor strong enough to support it
fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and plumbing
and electrical connections:
23' (33" wide),
23'/25' CustomStyle 'M 25', 26', 27', 29'
Sides 1/8" (4 mm) 1/8" (4 mm)
Top 1" (25 mm) 1" (25 mm)
Back 1/2" (13 mm) 1" (25 mm)
DIMENSIONS AND SPECIFICATIONS
.....
m
I II
_Jb
DIMENSIONS AND SPECIFICATIONS
(for 23' CustomStyld" models)
o
)
7C _"(Z78.4cm)
(91.4 cm)
t
24" (61 cm)
DIMENSIONS AND SPECIFICATIONS
(for 25' CustomStyld" models)
O
)
7; ¼"(183.5 cm)*
_- 36_
(91.4 cm)
__ 24" (6_cm)
"721/4" (183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the top of
the opening for the refrigerator, then an
additional 1/8" may be required to provide
clearance for cabinet doors to open freely.
29