La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Manual
Hide thumbs
Also See for KCombo3 WS-9080U-IT WS-9640U-IT:
- Instruction manual (123 pages) ,
- Instruction manual (6 pages)
Related Manuals for La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT
Summary of Contents for La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT
- Page 1 Contents Language Page ___________________________________________________________________ English French 35 37 Spanish...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Topic Page Inventory of Contents Features Setting Up Battery Installation Function keys LCD Screen and Settings Atomic time -WWVB Radio Controlled Time Manual Settings Weather Forecast and Tendency Display of Indoor Temperature and Humidity Reading Display of Outdoor Temperature Reading Display of Outdoor Minimum and Maximum records Display of Indoor Minimum and Maximum records Ice Alarm... -
Page 3: Inventory Of Contents
INSTANT TRANSMISSION is the state-of- This product offers: the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations... -
Page 4: Features
FEATURES: The Weather Station Hanging hole Battery compartment Display cover Function Keys Ice Alarm Key Foldout Stand • Atomic time function (WWVB Radio controlled time) with manual setting options • Daylight Saving Time ON/OFF • Hour and minute display • Calendar display •... -
Page 5: Setting Up
Oscar Outlook Forecaster • Temperature display in Fahrenheit (°F) or Celsius (°C) selectable • Indoor and Outdoor temperature display with MIN/MAX recording • All MIN/MAX recordings can be reset • Low battery indicator • Wall hanging or free standing The Outdoor Temperature Sensor •... -
Page 6: Battery Installation
seconds, remove the batteries and wait for at least 10 seconds before reinserting them. After inserting the batteries into the sensor, the Weather Station will start receiving data from the sensor. The outdoor temperature and the signal reception icon should then be displayed on the Weather Station. - Page 7 Remove the cover at the back of the Weather Station. Insert batteries observing the correct polarity (see marking). Replace compartment cover. INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR The temperature sensor uses 2 x AA, IEC LR6, 1.5V Alkaline battery.
-
Page 8: Function Keys
sensor at start-up and this code must be received and stored by the Weather Station in the first 3 minutes of power being supplied to it BATTERY CHANGE: It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life see Specifications below). - Page 9 SET key (Manual Setting): • Press to enter the set mode for the following functions: Time zone, Daylight saving time ON/OFF, Manual time, Year, Month, Date, Weekday and °C/°F settings. MIN/ MAX key • To toggle between the maximum/ minimum outdoor temperature and maximum/ minimum indoor temperature data •...
-
Page 10: Lcd Screen And Settings
LCD SCREEN AND SETTINGS: Transmitter low battery icon Outdoor Temperature Ice alarm icon Outdoor signal reception icon* Min / Max icon Weather Forecast icon (Oscar Outlook) Receiver low battery icon Indoor humidity %RH Indoor Temperature Time reception icon Time display Display "Calendar"... -
Page 11: Atomic Time -Wwvb Radio Controlled Time
Section 1 - OUTDOOR TEMPERATURE • Display the current outdoor temperature. • By pressing the MIN/ MAX key, display the stored MIN/MAX outdoor temperature, with simultaneous display of MIN/ MAX icon. • A signal reception symbol will be shown indicating that outdoor temperature signal is received. -
Page 12: Manual Settings
The WWVB radio station receives the time data from the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists is continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. - Page 13 TIME ZONE SETTING: flashing The time zone default of the Weather station is -5 hr. To change to another time zone: Press and hold the SET key for about 3 seconds to enter the time zone setting (flashing). Using the + key, set the time zone. The range runs between 0 to -12 hr, in consecutive 1hour intervals.
- Page 14 MANUAL TIME SETTING In case the Weather Station is not able to detect the Atomic time (WWVB) signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock. Hours (flashing) Minutes (flashing) To set the clock: The hour digits start flashing in the time display section.
- Page 15 weekday The date default of the Weather Station is 1. 1. of the year 2006 after initial set-up. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. To do this: Using the + key, set the year required.
-
Page 16: Weather Forecast And Tendency
Once the desired temperature unit has been chosen, confirm with the SET to exit the setting mode. WEATHER FORECAST AND TENDENCY: The Weather Forecast Icons (Oscar Outlook): One of the 8 different weather icons (featuring Oscar Outlook with different clothing) is displayed in the centre of LCD, which indicates the different forecast weather condition due to the current outdoor temperature (temperature value detected by outdoor sensor): 69.8 to 78.7 °F... -
Page 17: Display Of Indoor Temperature And Humidity Reading
DISPLAY OF INDOOR TEMPERATURE AND HUMIDITY READING: The indoor temperature and humidity are measured and displayed on the second section of the LCD. Indoor Relative Humidity % Indoor Temperature in °F DISPLAY OF OUTDOOR TEMPERATURE READING: The first LCD section shows the outdoor temperature. Outdoor Temperature in °F DISPLAY OF OUTDOOR MINIMUM AND MAXIMUM RECORDS:... -
Page 18: Display Of Indoor Minimum And Maximum Records
Press the MIN/MAX button once more, the outdoor max temperature and the time of recording this temperature will be displayed. Press the MIN/ MAX button once more to advance to the indoor MIN/ MAX display. DISPLAY OF INDOOR MINIMUM AND MAXIMUM RECORDS: In normal display mode, press the MIN/ MAX key three times, the minimum indoor temperature will be shown in LCD. -
Page 19: Ice Alarm
RESETTING THE INDOOR AND OUTDOOR MINIMUM AND MAXIMUM RECORDS In normal display mode, press the MIN/ MAX button to advance to the MIN/MAX records display. Press and hold the MIN/MAX key for about 2 seconds, this will reset all the indoor and outdoor MIN and MAX temperature records to the current temperature and time. -
Page 20: 915 Mhz Reception
915 MHz RECEPTION The Weather Station should receive the temperature data within 5 minutes after set-up. If the temperature data is not received 5 minutes after setting up (not successfully continuously, the outdoor display shows “- - -” ), please check the following points: The distance of the Weather Station or sensor should be at least 5 to 6.5 feet away from any interfering sources such as computer monitors or TV sets. - Page 21 To wall mount Choose a sheltered place. Avoid direct rain and sunshine. Before wall mounting, please check that the outdoor temperature values can be received from the desired locations. Fix a screw (not supplied) into the desired wall, leaving the head extended out the by about 5mm.
- Page 22 POSITIONING THE TEMPERATURE SENSOR: The sensor is supplied with a holder that may be attached to a wall with the two screws supplied. The sensor can also be position on a flat surface by securing the stand to the bottom to the sensor. To wall mount: 1.
-
Page 23: Care And Maintenance
CARE AND MAINTENANCE: • Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. • When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings. - Page 24 La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective...
- Page 25 All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
- Page 26 State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610...
- Page 27 This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged.