Unlocking The Product With A License File - HP NonStop SSH 544701-014 Reference Manual

On H- and J-Series
FUP ALTER SSHINST, CODE 800
3. Extract the archive by issuing the following command:
RUN SSHINST
The SSH program files will now be copied to the assigned subvolume.
4. For the Safeguard versions T9750G07^AFO/T9750H04^AFJ and later set the PRIV-LOGON bit for objects
SSH2, SFTPSERV and STN (if not already executed by DSM/SCM), e.g.:
SAFECOM ADD DISKFILE $SYSTEM.ZSSH.SSH2, PRIV-LOGON ON
SAFECOM ADD DISKFILE $SYSTEM.ZSSH.SFTPSERV, PRIV-LOGON ON
SAFECOM ADD DISKFILE $SYSTEM.ZSSH.STN, PRIV-LOGON ON
Note: Note: Macro SSH2INFO prints warning messages if the objects SSH2, SFTPSERV and STN do not have
a Safeguard DISKFILE entry with PRIV-LOGON set to ON.
The SSH2 process now also checks at startup if those objects have a Safeguard DISKFILE entry with PRIV-
LOGON set to ON. If this is not the case, then a warning will be logged. Without PRIV-LOGON ON, the
mentioned processes may not be able to impersonate other users correctly (needed after authentication). Not
setting PRIV-LOGON may also cause delays leading to interruption of service.

Unlocking the Product with a License File

If you did not purchase NonStop SSH with the NonStop Operating System Kernel for H Series and J Series NonStop
platforms, you will need a license file to use SSH components. The license file is tied to your system number.
The license file should be called LICENSE (which is the default name if not otherwise specified using the license
parameter) and should reside on the same subvolume as the SSH2 component. If you need to put the license file in a
different location you must use the PARAMETER LICENSE to specify the location. If there is a problem with the
license file, the SSH2 component will issue a message on startup and terminate.
If the license file is valid you will see the expiration date in a log message during startup.
Note: For HP NonStop SSH on S-Series or if you did not purchase NonStop SSH with the NonStop Operating System
Kernel for H Series and J Series, the default SSH installation restricts the use of the product to the MR-Win6530
terminal emulator client running on a NonStop System Console, and also restricts the use of the product to certain HP
tools, such as HP Systems Insight Manager. These tools use a special key to invoke the SSH client. To unlock
functionality for general use, you will need to request a license file from HP. Send an email to license.manager@hp.com
and include customer name, system id, system type, and the date when the order for the software was placed.
HP NonStop SSH Reference Manual
Installation & Quick Start • 33