Usetemplatesystemuser - HP NonStop SSH 544701-014 Reference Manual

filename
Specifies the name of the RESCONF file to be used by SSH2. The filename will override the value of the
DEFINE =TCPIP^RESOLVER^NAME, which may have been passed to SSH2 at startup.
*
Indicates no RESCONF file will be set. However, any DEFINE =TCPIP^RESOLVER^NAME passed to SSH2
at startup will remain in effect.
Default
The default for this parameter is *.
Considerations
•
Use this parameter to pass the value for the DEFINE =TCPIP^RESOLVER^NAME parameter to SSH2 servers
configured as generic processes. (DEFINEs cannot be propagated to generic processes.)

USETEMPLATESYSTEMUSER

The SYSTEM-USER of the template user is used for an automatically added user if the Boolean parameter
USETEMPLATESYSTEMUSER is TRUE. The value of USETEMPLATESYSTEMUSER is only relevant in case
AUTOADDSYSTEMUSERS is set to TRUE and AUTOADDSYSTEMUSERSLIKE is configured (defining the
template USER record). This allows the addition of users with the same (dummy) Guardian user ID or with the
SYSTEM-USER value of *NONE*.
Parameter Syntax
USETEMPLATESYSTEMUSER [TRUE|FALSE]
Arguments
TRUE
SYSTEM-USER of the USER template record is used for newly added USER record.
FALSE
The SSH user name is used as SYSTEM-USER for newly added USER record.
Default
The default for this parameter is FALSE.
See also:
AUTOADDSYSTEMUSERS, AUTOADDSYSTEMUSERSLIKE
HP NonStop SSH Reference Manual
Configuring and Running SSH2 • 111