Hitachi L700 SERIES Instruction Manual page 247

Code Function name
A081 AVR function select
A082 AVR voltage select
A085 Operation mode selection
A086 Energy saving mode tuning
A092 Acceleration (2) time setting
A292 Acceleration (2) time setting,2nd motor 0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
A392 Acceleration (2) time setting,3rd motor
A093 Deceleration (2) time setting
A293 Deceleration (2) time setting,2ndmotor
A393 Deceleration (2) time setting,3rd motor
Select method to switch to
A094
Acc2/Dec2 profile
Select method to switch to
A294
Acc2/Dec2, 2nd motor
A095 Acc1 to Acc2 frequency transition point 0.00 to 99.99, 100.0 to 400.0 (Hz)
Acc1 to Acc2 frequency transition
A295
point, 2nd motor
Dec1 to Dec2 frequency transition
A096
point
Dec1 to Dec2 frequency transition
A296
point, 2nd motor
A097 Acceleration curve selection
A098 Deceleration curve setting
[OI]-[L] input active range start
A101
frequency
[OI]-[L] input active range end
A102
frequency
A103 [OI]-[L] input active range start current
A104 [OI]-[L] input active range end current
A105 [OI]-[L] input start frequency enable
[O2]-[L] input active range start
A111
frequency
[O2]-[L] input active range end
A112
frequency
A113 [O2]-[L] input active range start voltage -100. to 02 end-frequency rate (%)
A114 [O2]-[L] input active range end voltage
A131 Acceleration curve constants setting
A132 Deceleration curve constants setting
A141 Operation-target frequency selection 1
A142 Operation-target frequency selection 2
A143 Operator selection
A145 Frequency to be added
A146 Sign of the frequency to be added
EL-S-curve acceleration
A150
ratio 1
EL-S-curve acceleration
A151
ratio 2
EL-S-curve deceleration
A152
ratio 1
EL-S-curve deceleration
A153
ratio 2
*1 This setting is valid only when the OPE-SR is connected.
Monitored data or setting
00 (always on), 01 (always off), 02 (off during deceleration)
200 V class: 200, 215, 220, 230, 240 (V)
400 V class: 380, 400, 415, 440, 460, 480 (V)
00 (normal operation), 01 (energy-saving operation)
0.1 to 100.0
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
00 (switching by 2CH terminal), 01 (switching by setting),
02 (switching only when rotation is reversed)
00 (switching by 2CH terminal), 01 (switching by setting),
02 (switching only when rotation is reversed)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)
00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0. to "[OI]-[L] input active range end current" (%)
"[OI]-[L] input active range start current" to 100. (%)
00 (external start frequency), 01 (0 Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
"02 start-frequency rate" to 100. (%)
01 (smallest swelling) to 10 (largest swelling)
01 (smallest swelling) to 10 (largest swelling)
00 (digital operator), 01 (keypad potentiometer), 02 (input via O),
03 (input via OI), 04 (external communication), 05 (option 1), 06 (option 2),
07 (pulse-string frequency input)
00 (digital operator), 01 (keypad potentiometer), 02 (input via O),
03 (input via OI), 04 (external communication), 05 (option 1), 06 (option 2),
07 (pulse-string frequency input)
00 (addition: A141 + A142), 01 (subtraction: A141 - A142),
02 (multiplication: A141 x A142)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (frequency command + A145), 01 (frequency command - A145)
0. to 50. (%)
0. to 50. (%)
0. to 50. (%)
0. to 50. (%)
8 - 5
Chapter 8 List of Data Settings
Default
_FF
02
200/400
00
50.0
15.00
15.00
15.00
15.00
15.00
15.00
00
00
0.00
0.00
0.00
0.00
00
00
0.00
0.00
20.
100.
00
0.00
0.00
-100.
100.
02
02
02
03
00
0.00
00
25.
25.
25.
25.
Setting Change
during during
operation operation Page
(allowed (allowed
or not) or not)
4-11
4-32
4-30
4-31
4-14
4-31
4-13
4-14
4-31