Grizzly G0580 Owner's Manual page 29

Note: For a quick gauge, fold a dollar bill in
half twice (four thicknesses of a dollar bill is
approximately 0.016" and place it between
the support bearing and the blade as shown
in Figure 35
Figure 35.
9.
Whenever changing a blade or adjusting
tension and tracking, the upper and lower
blade support bearings and guide-blocks
must be properly adjusted before cutting
operations.
Adjusting Blade
Guides
To adjust the upper and lower blade guides:
1.
2.
3.
Figure 36
Figure 36.
4.