Sony STR-DE845 Operating Instructions Manual page 21

Hide thumbs Also See for STR-DE845:
Table of Contents

Advertisement

Rear
speaker
height
(REAR
HEIGHT)*
Initial setting
: LOW
This
parameter
lets you
specify
the height
of your
rear
speakers
for pn_per
implementation
of the Digital
Cinema
Sound
surround
modes
in the "VIRTUAf"
sound
fields.
Refer
to the illustration
below.
• Select
"LOW"
if the location
of your
rear speakers
corresponds
to secticm
O.
• Select
"HIGH"
if the location
of your
rear speakers
corresponds
to section
Q.
This
setting
only effects
the surround
modes
in the
"VIRTUAL"
sound
fields•
* These parameters
are not available
when "Rear speaker
size (REAR)" is set to "NO".
"_'i"About the rear speaker position (SIDE, MIDDLE, and BEHIND)
This setting is designed
specifically
for implementation
of the
Digital Cinema Sound modes in the "VIRTUAL"
sound
fields.
With the Digital Cinema Sound modes, speaker
position
is not as
critical as other modes. All of the modes
in the "VIRTUAL"
sound fields were designed
under the premise
that the rear
speaker
would be located behind the listening
position,
but
presentation
remains
fairly consistent
even with the rear speakers
positioned
at a rather wide angle. However,
if the speakers
are
pointing
toward
the listener
from the immediate
left and right of
the listening
position,
the "VIRTUAL"
sound
fields will not be
effective unless the rear speaker
position
parameter
is set to
"SIDE".
Nevertheless,
each listening
envir_nnment has many variables,
like wall reflections,
and you may obtain better results using
"BEHIND"
or "MIDDLE"
if your speakers
are located high above
the listening
position,
even if they are to the immediate
left and
right.
Therefore,
although
it may result in a setting contrary
to the
"Rear speaker
position" explanation,
we recommend
that you
playback
multi channel surround
encoded
software
and listen to
the effect each setting has on your listening
envi_nment.
Choose
the setting that provides
a good sense of spaciousness
and that
best succeeds in forming
a cohesive
space between
the surround
sound from the rear speakers
and the sound of the f_nt
speakers.
if you are not sure which sounds
best, seiecl "BEHIND"
and then
use the speaker
distance
parameter
and speaker
level
adjustments
to obtain
proper balance.
Sub
woofer
selection
(SUB WOOFER)
Initial setting
: YES
• If you
connect
a sub woofer,
select
"YES".
• If you
do not connect
a sub woofer,
select
"NO".
This
activates
the bass redirection
circuitry
and
outputs
the
LFE signals
from other
speakers.
• In order
to take full advantage
of the Dolby
Digital
_,AC-3) bass redirection
circuitry,
we recommend
setting
the sub woofer's
cut (fff frequency
as high
as possible.
• Front speaker distance
(FRONT)
Initial setting : 16 feet* (5.0 meter)
Set the distance
from your listening
position to the front
(left or right) speaker (_ on page 19).
• Front speaker
distance can be set in 1 foot* (0.1 meter)
steps from 3 to 40 feet* (1.0 to 12.0 meters).
• If both speakers
are not placed an equal distance
from
your listening
position, set the distance
to the closest
speaken
* Models of area code U, CA only.
• Center
speaker
distance
(CENTER)
Initial setting : 16 feet* (5.0 meter)
Set the distance from your listening
position to the center
speaker.
• Center speaker distance can be set in 1 foot* (0.I meter)
steps from a distance equal to the front speaker
distance
(_ on page 19) to a distance 5 feet* (1.5 meters) closer to
your listening
position (0 on page 19).
• Do not place the center speaker
farther away from your
listening position than the front speakers.
* Models of area code U, CA only.
• Rear speaker distance
(REAR)
Initial setting : 11 feet* (3.5 meter)
Set the distance from your listening
position to the rear
(left or right) speaker.
• Rear speaker distance
can be set in 1 foot* (0.l meter)
steps from a distance equal to the front speaker
distance
(O on page 19) to a distance
15 feet* (4.5 meters) closer
to your listening
position (_ on page 19).
• Do not place the rear speakers
farther away from your
listening
position than the front speakers.
• If both speakers
are not placed an equal distance
from
your listening
position, set the distance
to the closest
speaken
* Models of area code U, CA only.
21
L
o
o
"0
O.
O_
_=,
t-
"0
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-de945

Table of Contents