System Hookup - Sony STR-DE845 Operating Instructions Manual

Speaker System Hookup
11
o
o
5'
r-
-o
¢L
5'
r-
IT
r¢
"O
3
Required cords
Speaker cords (not supplied)
One for each front, rear, and center speaker
(+)
(-)
Monaural audio cord (not supplied)
One for an active sub woofer
Front speaker (R) Front speaker (L)
Centerspeaker
@ ©
Black _
Black
FRONT
SPEAKERS B
IMPEDANCE
SELECTOR
@ 0
Rear speaker (R)
@
Rear speaker (L)
Active sub woofer
Terminals for connecting the speakers
Connect the To the
Front speakers (8 or 4* ohm) SPEAKERS FRONT A terminals
Additional pair of front SPEAKERS FRONT B terminals
speakers (8 or 4* ohm)
Rear speakers (8 ohm) SPEAKERS REAR terminals
Center speaker (8 ohm) SPEAKERS CENTER terminals
Active sub woofer SUB WOOFER AUDIO OUT
jack**
* See "'Speaker inlpedance" opt tile _lexl pa_e
** "_hlr ca_ co _ec a nctive s_rb woo_r to eithcr of tht, two iacks The
r_'nlaillmg i:ack c_;l hi" ii_ed to co_lt_ect ct second active slrb _oofer
Notes on speaker system hookup
• Twist the stripped ends of the speaker cords about
2/3 inch (10 mm). Be sure to match the speaker cord to
the appropriate terminal on the components: + to + and
- to -. If the cords are reversed, the sound will be
distorted and will lack bass.
• If you use front speakers with low maximum irrput
rating, adjust the volume carefully to avoid excessive
output on the speakers.
16