Sony SLV-792HF Operating Instructions Manual page 105

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use the EAC-32
antenna connector (not supplied) to
connect the antenna to the VCR.
"1 Loosen the screws on the antenna connector.
300-ohm twin
lead cable
EAC-32 Antenna
connector (not
supplied)
2
Wind the twin leads around the screws on the antenna connector.
3 Retighten the screws.
Attaching a UHF/VHF band
mixer
When using both 75-ohm coaxial cable
and 300-ohm twin lead cable for VHF/
UHF antenna, use the EAC-66 UHF/
VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
300-ohm twin
lead cable ,_
f
75-ohm coaxial -_
cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
"1 Loosen the screws on the mixer.
2 Wind the twin leads around the screws on the mixer.
3 Retighten the screws.
4 Connect the 75-ohm coaxial cable to the mixer.
Additional
Information I 105