Ez Setup; Language - Sharp AQUOS LC-46LE700UN Operation Manual

On=Screen
D isplay Menu
Example
FREEZE MENU
O @
¢ g
m FAVORITECH m
®®@®
AqUOS
1 Press MENU to display the MENU screen, and then
press _1/1_ to select "Setup".
2 Press A/V to select a specific adjustment item,
and then press ENTER.
o When you select "EZ Setup", "OHSetup", "Parental
CTRL" or "Reset",you can enter the 4-digit secret
number here. Seepage 25 for setting a secret number.
3 Press A/T (or 41/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR V3.0 in Home mode default setting.
Rome: "PowerSaving" is setto "Advanced", and AV MODE is
se[to "S%A,N D ARD''.
Store: "PowerSaving" is set to "OFF" a nd AV MODEis set to
"DYNAMIC(Fixed)".Picture Reset and FeatureDemo carl be
set.
Picture Reset: AV MODE will be set to "DYNAMIC(Fixed)"
regardlessof whether Picture Reset is "Orf' or "OFF". If you
select "On", AV MODEwi, be resetto "DYNAMIC(Fixed)"
if there is no operation for 30 minutes.When "Off" is
selected, AV MODEwill be set to "DYNAMIC(Fixed)".
Feature Demo: When "On" is selected, after all the settings
are completed, the FeatureDemo screen is displayed if
there is rio operation for several minutes.
® ENERGYSIAR qualification is based on AV MODE
"SIANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OI4 Search: Channel auto search makes the TV look for
all channels viewable in the set area.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
OH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
on: Skips channels. (Channelsek_ctiondisabled using CH
A/V,)
off: Does not skip channels,(Channelselectionenabled using
CHA/V.)
Remove Scrambled OH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes: Starts to removescrambled channels.
No: This function does not work.
o See "Initial Setup" on page 14 for setting each item.
If no channel is found, confirm the type of connection
made with your TV and try channel search again.
If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
, This function is availablefor DIGFfAL(Air)only.
This setting allows you to skip the HDMI or PC-IN Input
("Input 4 (PC)", "Input 5 (HDMI)", "Input 6 (HDMI)",
"Input 7 (HDMI)" and "Input 8 (HDMI)") on the Input
Selection operation.
Yes: Skips the input.
No: Does not skip input.
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
A/V/_I/I_ to select the new name for the input
mode.
Using the software keyboard, you can enter up to 10
characters for text. (See page 48.)
See "Initial Setup" on page 14 for setting each item.
If no channel is found, confirm the type of connection
made with your TV and try EZ Setup again.
If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
You cannot change labels if the INPUT SOURCE is TV.
@- 24