Treble; Bass; Balance; Surround - Sharp AQUOS LC-46LE700UN Operation Manual

On=Screen Display Menu
Cmmrmu-
You can adjust the sound quality to your preference
with the following settings.
Example
[ _ Audio ]
.......... A E/I i,!
1 Press MENU to display the MENU screen, and then
press 41/1_ to select "Audio".
2 Press A/V to select a specific adjustment item.
o Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
3 Press A/T (or 4t/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreaseaudio from Decrease audio from
the right speaker the left speaker
o Audio menu is grayed out when Output Select is set to
"Variable". (See page 28.)
For resetting all Audio adjustment items to the factory
preset values, press h,/T to select "Reset", press ENTER,
press 4/I_ to select "Yes", and then press ENTER.
Surround function allows you to enjoy realistic "live" sound.
On" Surround function is on.
Off: Normal sound.
Power control settinc
Example
_J Power Control
allows you to save energy.
I
FREEZE MENU i
o ®j
-- FAVORITECH --
®©©@
1 Press MENU to display the MENU screen, and then
press _1/1_ to select "Power Control".
2 Press A/V to select a specific adjustment item,
and then press ENTER.
3 Press A/T (or 4/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "_" appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
.... appears on the screen.
Off: This function does not work.
"Power Saving" does not function when you set "AV
MODE" to "DYNAMIC (Fixed)".
You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
--If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
--When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
--"DYNAMIC (Fixed)" will remain set to "Off".
When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture menu screen.
You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 17.)
,, You can choose Surround by pressing SURROUND on
the remote control unit. (See page 15.)
Audio menu is grayed out when Output Select is set to
"Variable". (See page 28.)
For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
When a TV program finishes, this function may not operate.
This function allows you to enjoy bass-enhanced sound.
On" Bass Enhancer function is on.
Off: Normal sound.
Audio menu is grayed out when Output Select is set to
"Variable". (See page 28.)
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
@- 23