Warning
messages
If a warning
message
is displayed
after the measurement,
you can still save
the measurement
results
by following
on-screen
instructions.
However,
we recommend
you
perform
YPAO
again
in order
to use the unit with the optimal
speaker
settings.
Select "Wiring" in "Result" (p.41) and check the cable connections
(+/-) of the speaker
identified by
W-1 : Out of Phase
A speaker cable may be connected
with the reverse polarity
"Reverse".
If the speaker is connected
incorrectly,
turn off the unit and then reconnect
the speaker cable.
(+/-).
Depending
on the type of speakers or room environment,
this message
may appear even if the speakers are
connected
correctly.
W-2: Over Distance
A speaker is placed
more than 24 m (8O ft) from the listening
Select "Distance"
in "Result" (p.41) and move the speaker identified
by ">24.0m
(>80.0ft)" within 24 m (80 ft)
position,
of the listening position.
Check the usage environment
and cable connections
(+/-) of each speaker, and the volume of the
W-3: Level Error
There are significant
volume differences
between the
subwoofer.
We recommend
using the same speakers
or speakers with specifications
that are as similar as
speakers,
possible.
PREPARATIONS
•
Optimizing
the speaker settings
automatically
(YPAO)
En 44